Subject: |
Re: Tracewell/NI GPIB 1014 |
From: |
[email protected] |
Date: |
Tue, 30 May 95 14:33:38 -0500 |
>We've just installed a Tracewell crate that "features" auto configuration
>of bus grants. Now our NI GPIB 1014 doesn't work. Does anyone know the
>secret?
But seriously folks... Did it work before? Are you using the SAME
1014 board? Configured with the SAME switch/jumper settings? Etc,
etc...??
Just for yucks, have you tried using just the CPU and the 1014 alone in
the crate all the way on the left with no empty slots? Remember that
the system controller MUST be on the left of everything else (I should
have added that to my beer-fee list of do's and dont's last week) and
that the mvme167 is the system controller in the typical configuration.
--John
[My soapbox for this week... I can't wait to get rid on the support for
the 1014 boards completely. They are so dang sensitive to EVERYTHING
that they rarely work on the first try. Maybe I'll get lucky and NI
will file chapter 11... or at least drop the 1014 line. Heck, I'll
settle for them firing the looser that came up with the design of that
yucky card.]
- Navigate by Date:
- Prev:
Re: Tracewell/NI GPIB 1014 Ned Arnold
- Next:
Re: Tracewell/NI GPIB 1014 Andy Kozubal
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Tracewell/NI GPIB 1014 Ned Arnold
- Next:
Re: Tracewell/NI GPIB 1014 Andy Kozubal
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|