EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Recommended setting for XyCom 566 Analog input module?
From: Andrew Johnson <[email protected]>
Date: Tue, 9 May 1995 09:22:05 BST
On Fri, 05 May 1995 17:31:02 PST Tony Cox - (415)926-3105 wrote:

> 	Here's a novice question. I'm starting to set up the hardware for
> our beamline (all dealings with EPICS so far have been theoretical(!)), and
> so I'm trying to interface my first module, the XVME-566.
> 
> 	Naturally, there are numerous jumpers and options. CSR addresses,
> data RAM addresses, interrupt levels etc. Quite a jumble for the first
> module.
> 
> 	Can anyone give me a quick, simple, tutorial on what the appropriate
> values should be, and how these might relate to the DCT VME parameters
> Card/Signal/Parameter?

I have worked out most of the jumper settings for the XVME-566 for Gemini, and 
they are described in my Standard Controller Hardware Documentation, available 
at the following URLs:

	http://www.ast.cam.ac.uk/~anj/gemini/hardware.ps.Z
	ftp://ftp.ast.cam.ac.uk/pub/gemini_RGO/sic/sic_anj_hardware.ps.Z

I can't guarantee 100% that they are all accurate, but I think they should be 
correct.

- Andrew

  O o ._    Andrew Johnson, Royal Greenwich Observatory
     __\\_	Madingley Road, Cambridge, CB3 0EZ
  __|ooooo|__	Tel +44 (0)1223 374823  Fax 374700
~~\_________/~~	WWW http://www.ast.cam.ac.uk/~anj/




Navigate by Date:
Prev: Re: Recommended setting for XyCom 566 Analog input module? Ned Arnold
Next: More on building Epics on Solaris Nick Rees
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Recommended setting for XyCom 566 Analog input module? Ned Arnold
Next: Re: Recommended setting for XyCom 566 Analog input module? 415
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·