Subject: |
Re: Channel Access Under Linux |
From: |
[email protected] (Jeff Hill) |
Date: |
Tue, 21 Feb 95 09:29:37 MST |
> Also, I haven't worried about the endian issues yet.
> Scanning through the code, it seems like I just need to set the proper
> flags in base/src/ca/os_depen.h. Is this right?
>
Most likely that will be all that is required. If you add additional
lines to the endian switch in os_depen.h please branch on the
architecture type and not the os type. Please send any changes
once you have tested.
Jeff
______________________________________________________________________
Jeffrey O. Hill Internet [email protected]
LANL MS H820 Voice 505 665 1831
Los Alamos, NM 87545 USA FAX 505 665 5107
- Navigate by Date:
- Prev:
Re: (NI GPIB on linux) Gerry Swislow
- Next:
sf2db Ric Claus
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Channel Access Under Linux John Quintana
- Next:
Re: Mark S. Engbretson (BESSRC-Cat)
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|