EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

<19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index <19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: MODBUS and serial line communications for EPICS
From: Matthias Clausen DESY -MKV2/KRYK- <[email protected]>
Date: Fri, 21 Oct 1994 10:06:40 EDT
We cannot help with MODBUS but maybe it is useful for anyone that we run 
serial communications over the greespring serial-IP board.
The serial communication runs a protocol with a local controller.
The advantage to use the serial-IP (not TCP/IP) is that you have a 
dedicated VME subsystem (162) to do this job.

Matthias
	----------------------------------------------------------------
	Matthias Clausen		Deutsches Elektronen Synchrotron
	Gruppe: MKV2/KRYK		       DESY/Hamburg, Germany

Navigate by Date:
Prev: Re:MODBUS F. Gougnaud
Next: ieee485 from EPICS? Carl Lionberger
Index: <19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re:MODBUS F. Gougnaud
Next: ieee485 from EPICS? Carl Lionberger
Index: <19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·