Experimental Physics and
Industrial Control System

	
> A friend writes:
> 
> The driver I am looking for is for a
> PENTEK Model 4261 10 MHz 12-bit A/D board (i.e. waveform digitizer)
> 
> I also need a driver for a BIT3 card; this card interfaces the SUN's
> S-BUS to the VME.
>  
> It is urgent that I find out if it exists, so that I don't have
> to recreate the wheel.
>
>
>
> If anyone has information reguarding this matter,
> he is not listed on the list_server.  However, his e-mail 
> address is as follows:
>
>	[email protected]      <Ernest Williams>
>
>
> Thanks a bunch,

We have an Epics Bit3 driver (Developed by DESY, written by Pavel 
Shevtsov) Our Bit3 iterfaces our PCMs to the VME. The driver is simple
read/write blocks and the "DeviceSupport" routine realises the protocol
between the two computers. You can contact me (bee hurry, from 26th of
Aug I will be on holiday for 2 weeks) or Pavel, directly:

 [email protected] - in Russia. 

Gabor Csuka
DESY/MKV2
[email protected]

Navigate by Date:

Prev: Re: APS Event Hardware watson

Next: Re: APS Event Hardware Bob Dalesio

Index: <1994>  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: a friend in need Jim B. Kowalkowski

Next: APS Event Hardware mcgehee

Index: <1994>  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024