|
Subject: |
Use of Routers in EPICS Networks |
|
From: |
[email protected] (Gary P. Carr) |
|
Date: |
Fri, 29 Jul 94 16:35:06 CDT |
The LANSCE (formerly LAMPF) linac/psr control system is converting to EPICS
and TCP/IP. The current control system is primarily VAX/VMS/Ethernet/DECnet
based. The control system network is connected to the laboratory wide
interconnected internet with a bridge. We are investigating the need to
isolate the new EPICS control system from the laboratory wide network with
a router instead of a bridge.
We would be very interested in hearing about any problems that other EPICS
controls systems connected to the internet may have had in this area. Even
the fact that there have not been any problems would be useful information.
Have most systems tried to physically isolate their control system
networks, or are they using routers or bridges?
----------------------------------------------------------------------------
Gary P. Carr [email protected]
Staff Member, AOT-6 505-667-5785
Los Alamos National Laboratory (fax) 505-665-0046
----------------------------------------------------------------------------
- Navigate by Date:
- Prev:
dbProcess Performance greene%denali.UUCP
- Next:
slot 0 controllers greene%denali.UUCP
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
dbProcess Performance greene%denali.UUCP
- Next:
slot 0 controllers greene%denali.UUCP
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·