Subject: |
errToLogMessage |
From: |
[email protected] (Jeff Hill) |
Date: |
Mon, 2 May 94 10:12:04 MDT |
Hello all,
For 3.12 we intend to change the default value of the vxWorks
variable "errToLogMessage" to true. This will cause all output
from the EPICS error logging routines to go to the vxWorks
routine logMsg() and not printf() by default.
Expected impact to systems that have taken the default value
for this parameter:
1) When two vxWorks tasks issue an error message at the same time the
output to the console will not be scrambled.
2) EPICS error messages will end up in the EPICS log file maintained
by the EPICS log server.
Jeff
______________________________________________________________________
Jeffrey O. Hill Internet [email protected]
LANL MS H820 Voice 505 665 1831
Los Alamos, NM USA 87545 FAX 505 665 5107
- Navigate by Date:
- Prev:
Re: applications that use channel access winans
- Next:
Re: errToLogMessage John R. Winans
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
applications that use channel access Jeff Hill
- Next:
Re: errToLogMessage John R. Winans
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|