This page is the home of MPF. The following components are provided:
MPF provides the following features:
This support is intended for applications that satisfy one or more of the following requirements:
Beginning with release 2-0, MPF uses the OSI calls from EPICS base, i.e. it now runs on all platform supported by epics Base 3.14. See: mpfosi
Beginning with release R1-5, the only hardware support supplied with mpf is for IP carriers supported by the ipac support. The unbundled support files were spread about the internet, but have now all been deleted as this software is obselete.
You can download the software from the links in the table below:
Module Version | EPICS Release | Filename | Documentation | Release Notes | Known Problems |
R1-10 | 3.13.6 | mpf1-10.tar.gz | mpf.html | releaseNotes.html | problems.html |
R1-8 | 3.13.5 | mpf1-8.tar.gz | mpf.html | releaseNotes.html | problems.html |
R1-7 | 3.13.5 | mpf1-7.tar.gz | mpf.html | releaseNotes.html | problems.html |
R1-6 | 3.13.3 | mpf1-6.tar.gz | mpf.html | releaseNotes.html | |
R1-5 | 3.13.1 | mpf1-5.tar.gz | mpf.html | releaseNotes.html | problems.html |
R1-4 | 3.13.1 | mpf1-4.tar.gz | mpf.html | releaseNotes.html | |
R1-3 | 3.13.1 | mpf1-3.tar.gz | mpf.html | releaseNotes.html | |
R1-2 | 3.13.1 | mpf1-2.tar.gz | mpf.html | None | |
R1-0 | 3.13.1 | mpf1-0.tar.gz | mpf.html | None |
Beginning with R1-3 mpf uses Andrew Johnson's IPAC support.
MPF Version | Requires module | Release needed |
|
ipac vxWorks |
R2-1 5.3 |
|
ipac vxWorks |
R2-1 5.3 |
|
ipac vxWorks |
R2-1 5.3 |
This software was developed by Marty Kraimer (ANL/APS) as a replacement for HiDEOS.