Experimental Physics and Industrial Control System
If you want to test the -rc1 tag in your git checkout then do the following at the top-level
git checkout R7.0.1-rc1
git submodule update
That will put all submodules in a detached HEAD state at the correct commit.
Mark
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf
> Of Heinz Junkes
> Sent: Thursday, December 07, 2017 10:27 AM
> To: EPICS core-talk
> Subject: base-7.0, can't make on linux
>
> I checked out the base-7.0:
>
> git clone --recursive -b core/master https://git.launchpad.net/epics-base base-7.0
>
> running “make” gives:
> …
> make -C ./libcom install
> make[2]: Entering directory '/home/fel/EPICS/base-7.0/modules/libcom'
> configure/CONFIG:19: /configure/CONFIG: No such file or directory
> configure/RULES_TOP:2: /configure/RULES_TOP: No such file or directory
> make[2]: *** No rule to make target '/configure/RULES_TOP'. Stop.
> make[2]: Leaving directory '/home/fel/EPICS/base-7.0/modules/libcom'
> ../configure/RULES_DIRS:84: recipe for target 'libcom.install' failed
> make[1]: *** [libcom.install] Error 2
> make[1]: Leaving directory '/home/fel/EPICS/base-7.0/modules'
> configure/RULES_DIRS:84: recipe for target 'modules.install' failed
> make: *** [modules.install] Error 2
>
> With the tar-file
> https://www.aps.anl.gov/epics/download/base/base-7.0.1-rc1.tar.gz
> everything works well.
>
> Heinz
>
- References:
- base-7.0, can't make on linux Heinz Junkes
- Navigate by Date:
- Prev:
Re: more git problems Michael Davidsaver
- Next:
Jenkins build is back to normal : epics-master » linux64 #31 APS Jenkins
- Index:
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: base-7.0, can't make on linux Andrew Johnson
- Next:
more git problems Dirk Zimoch
- Index:
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024