EPICS Home

Experimental Physics and Industrial Control System


 
2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: EPICS 7 Documentation or just README.examples for the V4 part.
From: Marty Kraimer <[email protected]>
To: [email protected]
Date: Mon, 4 Dec 2017 10:03:27 -0500
I have pushed changes to
http://epics-pvdata.sourceforge.net/informative/developerGuide/developerGuide.html

Marty

On 12/01/2017 05:39 AM, Marty Kraimer wrote:
On 12/01/2017 03:51 AM, Timo Korhonen wrote:
Hi Ernest,

Michael's instructions in 

give a pretty good start. Following those instructions you can build an IOC with PVA enabled (with qsrv, to be more precise.)

The image demo (iocimagedemo in pva2pva module), especially loading image.db gives IMO a pretty good idea how to start building IOCs with PVA usage (I prefer to use "PVA" than "V4" in this context.)

A more consistent documentation is TBD (maybe WIP) as far as I can tell. 
There is a lot of material available about PVA development but that should be integrated into the EPICS 7 context, to have it all in one place. 
In the mean time, http://epics-pvdata.sourceforge.net/informative/developerGuide/developerGuide.html might be good reading, although it is pretty much programmer-oriented.

I am working on the developerGuide to bring it up to date for EPICS 7.
I am not quite done but will push an updated version  by next Monday.

Marty

Cheers,

Timo



From: <[email protected]> on behalf of "Williams Jr., Ernest L." <[email protected]>
Date: Friday 1 December 2017 at 07:16
To: EPICS core-talk <[email protected]>
Subject: EPICS 7 Documentation or just README.examples for the V4 part.

Hi Andrew,


Is there any user documentation and application developer's guide for EPICS 7?

Oh, indeed I could use the App Dev guide for EPICS 3.16.1


How about for the V4 part of EPICS 7?

I poked around in the modules area looking for some user oriented documentation.

Also, are you planning to have some support in <BASE>/templates to show off  V4

usage?


Such as,  "makeBaseV4"


 /usr/local/controls/epics/base/base-7.0.1-rc1/templates
[ernesto@localhost templates]$ ls
makeBaseApp  makeBaseExt makeBaseV4



Cheers,


Ernest Williams
Dept. Head, Advanced Control Systems
Advanced Instrumentation Research, Technology Innovation Directorate
SLAC National Laboratory, Stanford University




References:
EPICS 7 Documentation or just README.examples for the V4 part. Williams Jr., Ernest L.
Re: EPICS 7 Documentation or just README.examples for the V4 part. Timo Korhonen
Re: EPICS 7 Documentation or just README.examples for the V4 part. Marty Kraimer

Navigate by Date:
Prev: Re: EPICS 7 Release Candidate 1 Mark Rivers
Next: Re: EPICS 7 Release Candidate 1 Andrew Johnson
Index: 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: EPICS 7 Documentation or just README.examples for the V4 part. Marty Kraimer
Next: Re: EPICS 7 Documentation or just README.examples for the V4 part. Williams Jr., Ernest L.
Index: 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024