Experimental Physics and Industrial Control System

Just built 3.14.10-pre1 for "Red Hat Enterprise Linux WS release 4"
linux-x86 (gcc version 3.4.6) and vxWorks-ppc604_long (gcc-2.96) on an
MVME550, VxWorks version 5.5.1. All of the tests passed under Linux but
I haven't run them yet on the 5500.

I have built Eric Bjorklund's mrfTiming driver (V2-4-1) to test the
event receiver and generalTime and get the following, successful,
output:

----------------------------------------------------------------------------

iocInit()
Starting iocInit
############################################################################
## EPICS R3.14.10pre1 $R3-14-10-pre1$ $2008/09/15 21:47:20$
## EPICS Base built Sep 16 2008
############################################################################
ErTimeGetCurrent: now returning uninitialised
ErTimeGetCurrent: now returning Reset Pending
ErTimeGetCurrent: now returning OK
iocRun: All initialization complete
value = 0 = 0x0

installLastResortEventProvider
value = 0 = 0x0
generalTimeReport(10)
Backwards time errors prevented 0 times.

Current Time Providers:
WARNING: OS Clock time was read before being set.
Using 1990-01-02 00:00:00.000000 UTC
    "MRF EVR", priority = 10
        Current Time is 2008-09-16 13:03:45.442237.
    "NTP", priority = 100
        Current Time is 2008-09-16 13:03:45.438875.
    "OS Clock", priority = 999
        Current Time is 1990-01-02 00:00:00.000000.

Event Time Providers:
    "MRF EVR", priority = 10
    "Last Resort Event", priority = 999

value = 0 = 0x0
ClockTime_Report(10)
OS Clock driver has *not* yet synchronized
value = 0 = 0x0

-> ClockTime_Report(10)
OS Clock driver has synchronized to a priority=10 provider
Last successful sync was at 2008-09-16 13:06:43.910608
Syncronization interval = 60 seconds

----------------------------------------------------------------------------

Removing and replacing the timing fibre gives:

ErTimeGetCurrent: now returning Link Error
ErTimeGetCurrent: now returning Reset Pending
ErTimeGetCurrent: now returning Link Error

->generalTimeReport(10)
Backwards time errors prevented 0 times.

Current Time Providers:
    "MRF EVR", priority = 10
        Current Time not available
    "NTP", priority = 100
        Current Time is 2008-09-16 13:09:52.492416.
    "OS Clock", priority = 999
        Current Time is 2008-09-16 13:09:52.491936.

Event Time Providers:
    "MRF EVR", priority = 10
    "Last Resort Event", priority = 999

-> ClockTime_Report(10)
OS Clock driver has synchronized to a priority=100 provider
Last successful sync was at 2008-09-16 13:09:43.911936
Syncronization interval = 60 seconds

ErTimeGetCurrent: now returning Reset Pending
ErTimeGetCurrent: now returning OK

-> ClockTime_Report(10)
OS Clock driver has synchronized to a priority=10 provider
Last successful sync was at 2008-09-16 13:11:43.913754
Syncronization interval = 60 seconds

Paul.

<DIV><FONT size="1" color="gray">This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
</FONT></DIV> 

Navigate by Date:

Prev: Re: EPICS Base R3.14.10-pre1 available for testing Andrew Johnson

Next: libCom tests and a softIOC on Linux hosts Ernest L. Williams Jr.

Index: 2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: EPICS Base R3.14.10-pre1 available for testing Kazuro FURUKAWA

Next: libCom tests and a softIOC on Linux hosts Ernest L. Williams Jr.

Index: 2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024