EPICS Home

Experimental Physics and Industrial Control System


 
2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: EPICS Base's support on Phar Lap ETS
From: [email protected]
To: [email protected]
Date: Mon, 18 Aug 2008 17:50:47 +0800

Hi guys,

    We're trying to migrate EPICS Base to Phar Lap ETS ( a real-time operating system from Ardence ) these days, and it turns out the modified Base works well on Phar Lap. Phar Lap's system API is much like the WIN32 API, with the differences as follows:
1. Thread Priority Range is (-128 to 127), much like VxWorks' (0 to 256)
2. You cannot create a process, only one process allowed on PharLap
3. Only WinSock 1.1 is supported on Phar Lap
4. Other minor issues...

    What I want say is can we make some contribution to the EPICS Base, let the libCom support a new realtime OS Phar Lap ETS? Any suggestions from you guys are appreciated :-)

Thanks,

Alex Chen | R&D, NI China | Tel: +86 21 50509810 ext.3221

Replies:
RE: EPICS Base's support on Phar Lap ETS Jeff Hill
Re: EPICS Base's support on Phar Lap ETS Andrew Johnson

Navigate by Date:
Prev: Re: IOC Redundancy in R3.14.10 Benjamin Franksen
Next: RE: EPICS Base's support on Phar Lap ETS Jeff Hill
Index: 2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: IOC Redundancy in R3.14.10 Liu, Gongfa
Next: RE: EPICS Base's support on Phar Lap ETS Jeff Hill
Index: 2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024