next up previous contents
Next: Extended BSP routines Up: Infrastructure - Tools and Previous: Get, build and install   Contents

Try running some RTEMS sample applications (optional)

The RTEMS build process creates some sample applications. If you're just getting started with RTEMS it's probably a good idea to verify that you can actually run a simple RTEMS application on your target hardware before trying to run a full-blown EPICS IOC application.

The actual method of loading an application into a target processor is hardware-dependent. Section 4.1.3 describes a method which may be used with RTEMS mvme2100 targets.



Eric Norum
[email protected]
Mon Oct 19 11:30:39 CDT 2009