next up previous contents
Next: Specify the target architectures Up: EPICS Base Previous: Specify the network domain   Contents

Specify the network interface

Some RTEMS board support packages support more than one type of network interface. The pc386 BSP, for example, can be configured to use several different network interface cards. By default the EPICS network configuration for the pc386 BSP loads network drivers for all network interfaces which support run-time probing so if you've got one of these network interfaces you don't need to make any changes to the EPICS network configuration. If not, see the comments in
src/RTEMS/base/rtems_netconfig.c
for instructions on selecting a network interface card when building your EPICS application. Most RTEMS board support packages support only a single network interface and need no changes to rtems_netconfig.c.



Eric Norum
norume@aps.anl.gov
Mon Oct 19 11:30:39 CDT 2009