Argonne National Laboratory

Advanced Photon Source
Sector 9

Argonne Home > Advanced Photon Source >

9-ID C SOE 2 Search Procedure

Use the map below to help you locate items necessary to searching the hutch. (Click to enlarge it.)

9-ID SOE2 Hutch Diagram

The following MUST be done to search this hutch:

1. Enter the hutch and locate the search box entitled "Search Box 1." This is Number 1 on the above map. You should see a yellow light flashing here.

2. When you are prepared to shut the hutch, check the entire hutch to be sure that no other persons are present in the hutch.

3. If the area is empty, press the green button on the 1st search box. The yellow light now stops flashing and is solid yellow.

4. At this time, an audio alarm will sound instructing anyone else in the hutch to exit.

5. Move out of the hutch through the open door making sure that no one enters.

6. Close the door by holding down the green button on the door control box. Be sure that no one enters the hutch while you do this.

7. When the door closes and locks, you will see the two green lights on the operating box light up indicating that the hutch is magnetically closed and locked. At this point, you have successfully completed the hutch search.


U.S. Department of Energy UChicago Argonne LLC Office of Science - Department of EnergyOffice of Basic Energy Sciences - Department of Energy
Privacy & Security Notice | Contact Us | Site Map