Printable Version | View in New Window | Update Beamline Info

Beamline 6-ID-D: Sector 6 - High-energy Branch Beamline

X-ray Science Division, APS
Physics, Materials Science

Description

6-ID-D is a high-energy branch line on sector 6. It runs in parasitic mode using the beam transmitted through the monochromator of the lower energy beamline. It is mainly used for PDF and powder diffraction measurements using a 2-D detector, but is also equipped with a diffractometer for high-energy single-crystal measurements.

Supported Techniques

Magnetic x-ray scattering

High-energy x-ray diffraction

Powder diffraction

Pair distribution function

Beamline Controls and Data Acquisition

Sun UNIX workstations running Solaris. EPICS-based control system with VME electronics and SPEC data acquisition software.

Detectors

NaI detectors
Ionization chambers
Single-element Si energy dispersive detector
Photodiodes
Mar345 imaging plate system

Additional Equipment

6K Displex
High-temperature furnace for powder diffraction

Local Contacts

Name	DOUGLAS ROBINSON (General Diffraction)
Phone	630.252.0247
Email	drobinsn@aps.anl.gov
Name	JONATHAN LANG (Magnetic Scattering)
Phone	630.252.0122
Email	lang@aps.anl.gov

Beamline Specs

Source	3.3 Undulator (Undulator A)
Monochromator Type	Si(111)
Energy Range	27-52 keV
Resolution (ΔE/E)	$4 x 10$ ^-4
Flux (photons/sec)	$2 x 10$ ¹⁰ @40 keV
Beam Size (HxV)
Unfocused	1mm x 1mm
Monochromator Type	Si(311)
Energy Range	50-100 keV
Resolution (ΔE/E)	$4 x 10$ ^-4
Flux (photons/sec)	$2 x 10$ ¹⁰ @70 keV
Beam Size (HxV)
Unfocused	1mm x 1mm
Monochromator Type	Si(331)
Energy Range	67-130 keV
Resolution (ΔE/E)	$4 x 10$ ^-4
Flux (photons/sec)	$2 x 10$ ¹⁰ @100 keV
Beam Size (HxV)
Unfocused	1mm x 1mm

For additional information see:
http://www.aps.anl.gov/Sectors/Sector6/6idd

Current Status:	Operational/Accepting General Users
Access Mode:	On-site