| alter_elements | Change an element parameter from the command file. |
| amplification_factors | Compute orbit amplification functions. |
| analyze_map | Determine first-order matrix from tracking. |
| aperture_data | Define aperture using an SDDS file. |
| bunched_beam | Set up beam generation. |
| change_particle | Change the type of particle. Default is electron. |
| chromaticity | Correct the chromaticity. |
| closed_orbit | Compute the closed orbit. |
| correct | Correct the orbit or trajectory. |
| correction_matrix_output | Obtain orbit/trajectory correction matrix in a file. |
| correct_tunes | Correct the tunes. |
| coupled_twiss_output | Compute and output coupled twiss parameters. |
| divide_elements | Specify division of elements into pieces. |
| error_element | Define errors for a set of elements. |
| error_control | Set up and control error generation process. |
| find_aperture | Determine the transverse (e.g., dynamic) aperture. |
| floor_coordinates | Compute and output floor coordinates. |
| frequency_map | Compute and output frequency map. |
| global_settings | Change global settings. |
| insert_elements | Insert elements into the lattice at many places. |
| insert_sceffects | Insert space charge kick elements. |
| linear_chromatic_tracking_setup | Set up for fast tracking with chromatic effects. |
| link_control | Control linking of element parameters. |
| link_elements | Define link between parameters of two elements. |
| load_parameters | Load element parameters from SDDS file. |
| matrix_output | Output transfer matrix along beamline. |
| moments_output | Compute coupled beam moments, with radiation option. |
| momentum_aperture | Determine s-dependent momentum aperture. |
| optimize | Execute an optimization. |
| optimization_covariable | Define a dependent parameter for optimization. |
| optimization_setup | Perform initial optimization setup. |
| optimization_term | Define a term of penalty function. |
| optimization_variable | Define an optimization variable. |
| print_dictionary | Print the element dictionary. |
| rpn_expression | Execute an expression in the rpn interpreter. |
| rpn_load | Load values from SDDS file into rpn interpreter. |
| run_control | Set up simulation steps and passes. |
| run_setup | Define global simulation parameters and output files. |
| sasefel | Evaluate SASE FEL gain etc. |
| save_lattice | Save new lattice file. |
| sdds_beam | Define loading of particles from SDDS file. |
| semaphores | Define file semaphores for start/end of run. |
| slice_analysis | Perform slice analysis along beamline. |
| subprocess | Execute a command in the shell. |
| steering_element | Define element parameters as steering correctors. |
| transmute_elements | Transmute elements from one type to another. |
| twiss_analysis | Define subset of beamline for twiss parameter analysis. |
| twiss_output | Set up twiss parameter and related computation. |
| track | Execute tracking of particles and other operations. |
| tune_shift_with_amplitude | Compute tune shifts with amplitude. |
| vary_element | Vary element parameters in loops. |