run_setup
.
element_divisions
field in run_setup
provides a simpler, but less flexible, method of performing
element division. At present, these element types may be divided:
QUAD
, SBEN
, RBEN
, DRIF
, SEXT
.
run_setup
command.
save_lattice
and element divisions together will
produce an incorrect lattice file.
load_parameters
or parameters saved via the parameter
entry of the run_setup
command.
If you wish to load parameters while doing element divisions or if
you wish to load parameters from a run that had element divisions
in effect, you should not load length data for any elements that
are (or were) split. The name and item pattern features of
load_parameters
are helpful in restricting what is loaded.
÷_elements STRING name = NULL; STRING type = NULL; STRING exclude = NULL; long divisions = 0; double maximum_length = 0; long clear = 0; &end
name
-- A possibly wildcard-containing string specifying
the elements to which this specification applies.
type
-- A possibly wildcard-containing string specifying
the element types to which this specification applies.
exclude
-- A possibily wildcard-containing string specifying
elements to be excluded from the specification.
divisions
-- The number of times to subdivide the specified
elements. If zero, then maximum_length
should be nonzero.
maximum_length
-- The maximum length of a slice. This is
usually preferrable to specifying the number of divisions, particularly
when the elements divided may be of different lengths. If zero, then
divisions
should be nonzero.
clear
-- If nonzero, all prior division specifications are
deleted.