Parallel capable? : yes

Parameter Name | Units | Type | Default | Description |

L | double | 0.0 | arc length | |

ANGLE | double | 0.0 | bend angle | |

E1 | double | 0.0 | entrance edge angle | |

B1 | double | 0.0 | normalized gradient (K1=B1*L/ANGLE) | |

Q1REF | double | 0.0 | distance from septum at which bending radius is L/ANGLE | |

FLEN | double | 0.0 | fringe field length | |

ACCURACY | double | 0.0001 | integration accuracy | |

METHOD | STRING | runge-kutta | integration method (runge-kutta, bulirsch-stoer, modified-midpoint, two-pass modified-midpoint, leap-frog, non-adaptive runge-kutta | |

MODEL | STRING | linear | fringe model (hard-edge, linear, cubic-spline, tanh, quintic | |

GROUP | string | NULL | Optionally used to assign an element to a group, with a user-defined name. Group names will appear in the parameter output file in the column ElementGroup |