next up previous
Next: MHISTOGRAM Up: Element Dictionary Previous: MAXAMP

MBUMPER

A time-dependent multipole kicker magnet. The waveform is in SDDS format, with time in seconds and amplitude normalized to 1.
Parallel capable? : yes
Parameter Name Units Type Default Description
L $M$ double 0.0 length
STRENGTH   double 0.0 geometric strength in 1/môrder
TILT $RAD$ double 0.0 rotation about longitudinal axis
DX $M$ double 0.0 misalignment
DY $M$ double 0.0 misalignment
DZ $M$ double 0.0 misalignment
TIME_OFFSET $S$ double 0.0 time offset of waveform
ORDER   long 0 multipole order, where 1 is quadrupole, 2 is sextupole, etc.
PERIODIC   long 0 is waveform periodic?
PHASE_REFERENCE   long 0 phase reference number (to link with other time-dependent elements)
FIRE_ON_PASS   long 0 pass number to fire on
N_KICKS   long 0 Number of kicks to use for simulation.
WAVEFORM   STRING NULL $<$filename$>$=$<$x$>$+$<$y$>$ form specification of input file giving kick factor vs time
GROUP   string NULL Optionally used to assign an element to a group, with a user-defined name. Group names will appear in the parameter output file in the column ElementGroup





This element simulates a time-dependent multipole kicker magnet. To use this element, you must supply an SDDS file giving the time-dependent waveform. The element is called MBUMPER to because HKICK, VKICK, KICKER are used for steering magnets.

The arrival time of the beam is taken to define the reference time, $t=0$. Hence, if the waveform file has the maximum amplitude at $t=0$, the beam will get kicked at the peak of the waveform. If the waveform peaks at $t=t_{peak}$, then setting TIME_OFFSET equal to $-t_{peak}$ will ensure that the beam is kicked at the peak amplitude.

By default, the kicker fires on the first beam passage. However, if FIRE_ON_PASS is used, then the kicker is treated like a drift space until the specified pass.

If PHASE_REFERENCE is non-zero, then the initial timing is taken from the first time-dependent element that has the same PHASE_REFERENCE value. This would allow, for example, simulating several kickers firing at the same time. Delays relative to this reference time can then be given with positive adjustments to TIME_OFFSET.

The input file need not have equispaced points in time. However, the time values should increase monotonically.

This element simulates a quadrupole or higher order kicker only. For dipole kickers, see the BUMPER element.





Explanation of $<$filename$>$=$<$x$>$+$<$y$>$ format: Several elements in elegant make use of data from external files to provide input waveforms. The external files are SDDS files, which may have many columns. In order to provide a convenient way to specify both the filename and the columns to use, we frequently employ $<$filename$>$=$<$x$>$+$<$y$>$ format for the parameter value. For example, if the parameter value is waveform.sdds=t+A, then it means that columns t and A will be taken from file waveform.sdds. The first column is always the independent variable (e.g., time, position, or frequency), while the second column is the dependent quantity.


next up previous
Next: MHISTOGRAM Up: Element Dictionary Previous: MAXAMP
Robert Soliday 2014-06-26