Presentations/Papers
MEDSI (Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation) 2004
- Cooling Tutorial
- Mechanical Design of the Pinhole Imaging System in the APS Storage Ring
- Analysis of Gold-Copper Braze Joints in Glidcop for UHV Components at the Advanced Photon Source
- Radiation Damage to Magnet Water Hoses at the APS
- Performance of the Upgraded Storage Ring Injection Area at the Advanced Photon Source (APS)
PAC 2003
- Low-Conductivity Water Systems For Accelerators
- Development of Room Temperature Accelerating Structures for the RIA
MEDSI 2002
- Storage Ring Injection Area Upgrade at the Advanced Photon Source (APS)
- Fabrication Techniques for Septum Magnets at the APS
- Investigation of Passive Vibration Damping Methods for the Advanced Photon Source Storage Ring Girders
- An Evaluation of Enhanced Cooling Techniques for High-Heat-Load Absorbers
- Cooling Water Systems for Accelerator Components at the Advanced Photon Source
- Temperature Regulation of Process Water Systems for the APS Storage Ring
-
Mitigation of Copper Corrosion and Agglomeration in APS Process Water Systems
- All papers from the 2nd International MEDSI Workshop
PAC 2001
- New Synchrotron Injection Septum Magnet at the APS
- Mechanical Design of a Flexible Bunch Compressor for APS Linac
- Investigation of the Surface Resistivity Tolerance of the Kicker Ceramic Vacuum Chamber at APS
- Synchrotron Radiation Issues in the VLHC
- An e+e- Collider in the VLHC Tunnel and Poster
- The Chemistry of Copper in Water and Related Studies Planned at the Advance Photon Source
MEDSI 2000
- High Heat-Load Absorbers for the APS Storage Ring
- A High-Precision Cryogenically-Cooled Crystal Monochromator for the APS Diagnostics Beamline
- Performance of the Vibration Damping Pads in the APS Storage Ring
PAC 1999
- Reduction of X-BPM Systematic Errors by Modification of Lattice in the APS Storage Ring
- Mechanical Design and Construction of Septum Magnets at the 7-GeV APS
- APS SR Flexible Bellows Shield Performance
- Commissioning Results of the Narrow_band Position Monitor System Upgrade in the APS Storage Ring
- Improved Temperature Regulation and Corrosion Protection of APS Linac RF Components
- The Operation of BNL/ATF Gun-IV Photocathode RF Gun at the Advanced Photon Source
- An ep Collidor with E(cm) = 1 TeV in a VLHC Booster Tunnel
- Studies of Slow-Positron Production Using Low-Energy Primary Electron Beams
- A Hot-Spare Injector for the APS Linac
PAC 1997
- Beam Chopper for the Low-Energy Undulator Test Line (LEUTL) in the APS
- Mechanical Design Upgrade of the APS Storage Ring RF Cavity Tuner
- Design and Analysis of a BE Window for the APS Diagnostics Undulator Beamline
- Status of the APS Diagnostics Undulator Beamline
- Investigation of Open-Loop Beam Motion at Low Frequencies at the APS
- Upgraded Cavities for the Positron Accumulator Ring of the APS
- An e+e- Top Factory in a 50 + 50 TeV Hadron Collidor Tunnel
PAC 1995
- Cooling the APS Storage Ring Radio-Frequency Accelerating Cavities: Thermal/Stress/Fatigue Analysis and Cavity Cooling Configuration
- Reduction of Multipactor in RF Ceramic Windows Using a Simple Titanium-Vapor Deposition System
- The Development of Beam Current Monitors in the APS
- Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber
- Reduction of Open-Loop Low Frequency Beam Motion at the APS
RIA and LCLS Projects
- An innovative concept for acceleration of low-energy low-charge-state heavy-ion beams
- Fabrication of 57MHz RFQ - Presentation, July 21, 2004
- LCLS Fixed Support Concepts - Presentation, April 19, 2005
- Thermal and Vibrational Stability of the LCLS Support System - Presentation, August 16, 2005
MISCELLANEOUS
- SR Sector Modification for Two Undulators in the ID Section
- Ground Vibration Problems at the Light Sources (Presentation at the 22nd Advanced ICFA Beam Dynamics Workshop on Ground Motion in Future Accelerators, November 6-9, 2000, SLAC)
- The Effects of Radiation and Creep on Viscoelastics Damping Materials
- Passive Vibration Damping of the APS Machine Components
- Decreasing Vibration in the Advanced Photon Source Cooling Water System
- Effect of Water Velocity on Erosion and Cooling of Glidcop Absorbers Subjected to High X-ray Beam Current
- Feasibility of Switching to High-Dissolved-Oxygen Process Water at APS
- D.J. Wang's Presentation on Flow-Induced Vibrations at NSRRC - May 20, 2005
- D.J. Wang's Presentation on On-line Mechanical Measurements - May 20, 2005
ME Group Presentations