If a magnet fails to pass the Go-Nogo gauge test, repeat the test. If it fails again then immediately page H.Friedsam
	(4-1864) and S.Sharma (4-6820). Their backups are M.Penicka (4-1863) and R.Bechtold (4-2906), respectively.
	The completed test data sheet is to be hand delivered (not left in the mailbox) to H. Friedsam or his backup and
	R. Bechtold so it can be posted on the web as soon as possible.
	Vacuum Chamber Clearances
	Sector	Girder 1	Girder 2	Girder 3	Girder 4	Girder 5
F	1	X	X	X	X	X
A	2	X	X	X	X	X
	3	X	X	X	X	X
	4	X	X	X	X	X
	5	X	X	X	X	X
	6	X	X	X	X	X
	7	X	X	X	X	X
	8	X	X	X	X	X
	9	X	X	X	X	X
B	10	X	X	X	X	X
	11	X	X	X	X	X
	12	X	X	X	X	X
	13	X	X	X	X	X
	14	X	X	X	X	X
	15	X	X	X	X	X
	16	X	X	X	X	X	Sext.Gauge size:(Go) 4.979" (Nogo) 5.147"
	17	X	X	X	X	X	Girder-2		Girder-4
C	18	X	X	X	X	X	AS2-AS3		BS3-BS2
	19	X	X	X	X	X	The gage is to be inserted at the location marked by the red arrows
	20	X	X	X	X	X
	21	X	X	X	X	X
	22	X	X	X	X	X
	23	X	X	X	X	X
D	24	X	X	X	X	X
	25	X	X	X	X	X
	26	X	X	X	X	X
	27	X	X	X	X	X
	28	X	X	X	X	X
	29	X	X	X	X	X
E	30	X	X	X	X	X
	31	X	X	X	X	X
	32	X	X	X	X	X
	33	X	X	X	X	X
	34	X	X	X	X	X
	35	X	X	X	X	X
F	36	X	X	X	X	X
	37	X	X	X	X	X
	38	X	X	X	X	X	Quad.Gauge size:(Go) 9.624"(Nogo) 9.792"
	39	X	X	X	X	X	Girder-1             Girder-3             Girder-5
	40	X	X	X	X	X	AQ1-AQ3          AQ4-BQ4          BQ3-BQ1