Film Coefficient and Pressure Drop Calculator
Water Liquid Nitrogen

The calculations are for liquid nitrogen.
Click "Do Calculations" button for new input values or new units.
All values currently in the fields are consistent default values.

Channel (Hydraulic) Diameter : Value :
Fluid Flow :  Value :
Pressure :  Value :
Bulk Fluid Temperature :  Value :
Estimated Wall Temperature :
Value :
Channel Length:
(Optional, Default: 0.5m)
Value :
For accurate values, please press the "More Values" button to open a window with a chart from NIST website, copy the values for density, specific heat (Cp), bulk fluid viscosity, and thermal conductivity from the line whose temperature matches that of the bulk fluid , and then copy the value for wall fluid viscosity from the other line of the chart.  Wall temperature may be set to bulk fluid temperature as an approximation, and then only one line is displayed in the NIST chart. Caution: if the wall temperature is greater than fluid's saturation temperature (the second line of the chart will indicate vapor phase), the wall liquid viscosity is inadmissible.

Density : kg/m3
Specific Heat (Cp): J/g*K
Bulk Liquid Viscosity: uPa*s
Wall Liquid Viscosity: uPa*s
Thermal Conductivity : W/m*K

Results :
Film Coefficient: Pressure Drop: Other Values
Sieder Tate Eq:
Dittus Boelter Eq:
Darci Eq 1:
Darci Eq 2:
Reynolds Number:
Prandtl Number:
Friction Factor:
Specific Heat:
Mass Density:
Channel Area:

Film coefficient values for different multiples of nominal velocity.